Sub 10 active subwoofer 10" 400 Watt
SUB 10 Standardversion Weiss Varnex KlavierlackAktiver Subwoofer mit 10" Chassis . 108dB/SPL
300 Watt Endstufe eingebaut. 19 Hz-90 Hz



SUB 10 is a professional active studio subwoofer, designed for accurate sound realization.
SUB 10 is a professional active studio subwoofer equipped with sub-bass loudspeaker driver of 29 cm in diameter, class D power amplifier 400W at 4Ohm mounted on the rear panel, there are also calibrated controls, protections, indicators, and the input/output terminals.
SUB 10 is designed for operation in stereophonic or multi-channel systems (5+1 or 7+1 and larger) such as DOLBY, DTS, THX, etc.
This subwoofer is suitable for small/mid-sized:
- recording studios,
- broadcasting studios,
- TV studios,
- multimedia studios,
- post production facilities,
- mastering,
- digital workstations,
- home recording studios,
- audio monitoring systems of the highest quality.
Technical specifications
Subwoofer
Type | Active – Class D power amplifier Hypex: 400 W @ 4Ω |
Dimensions | Height x Width x Depth 39 cm x 39 cm x 40 cm / 15.35" x 15.35" x 15.75" |
Free Field Frequency Response | ±2.5 dB: 19-90 Hz |
SPL in Free Field @ 1m | RMS: 108 dB (single subwoofer) Peak: 116 dB (pair of subwoofers) |
Weight | 24 kg / 53 lbs |
Calibrated Controls
Input Sensitivity Switch / VOLUME (8 positions) | -4.5dB, -3dB, -1.5dB, 0dB, 1.5dB, 3dB, 4.5dB, 6dB |
Input Sensitivity Switch / VOLUME (3 positions) | -20dB, -10dB, 0dB |
Low-pass filter Switch CUT OFF | 40Hz, 45Hz, 50Hz, 57Hz, 63Hz, 71Hz, 80Hz, 90Hz |
Filters By-Pass Switch UNFILTERED (LFE) | Position down: filters ON Position up: filters OFF |
PHASE Switch | 0 degrees, 180 degrees |
STAND-BY Switch | Position down: active STAND-BY Position up: continuous mode (Stand-by OFF) |
Loudspeaker
Subbass Loudspeaker | Ø 29 cm Diaphragm: cellulose, surround: rubber |
Amplifiers
Subbass Loudspeaker Power Amplifier | 400 W RMS @ 4 Ω (270 W RMS @ 6 Ω) |
THD distortions | Typ 0.01%, Max 0.05% 20Hz<f<20kHz, Pout < PR/2 Max 0.04% 20Hz<f<20kHz, Pout = 1W |
Inputs, Outputs
INPUT right (R) and left (L) | Two types (common socket Combo): - XLR symmetrical (balanced) - TRS symmetrical (balanced) "6.3 mm" and RCA nonsymmetrical Input impedance 10 kΩ |
„Loop Through” Output | XLR symmetrical, Output impedance 100 Ω |
Protections
Subbass Loudspeaker Protection | Pop-free start and stop control |
Power Amplifiers Protections | Overcurrent protection |
Power Amplifiers Protections | Overvoltage protection |